Help get this topic noticed by sharing it on Twitter, Facebook, or email.
I’m frustrated

Blu-ray Dual Layer Burning

Burning multisession dual layer Blu-ray [50gb] disks, and sections of disk are corrupt, windows 10 error message "0x800706F9: The disk media is not recognized, It may not be formatted.", folder structure and file details present, but files cannot be opened, I have a copy of the burn log. I have previously reported this issue with Nero12 and Nero16 burns. Cost me a lot of Blu-ray disks this one.
1 person has
this question
+1
Reply
  • Hi Alan-

    It could be that your optical drive doesn't support them. Would you post the log file contents or upload/share it and provide a link.
    • The fix is to burn initially just over the 26GB mark, find the faulty files and delete them in another burn, then in a third burn add those files again and any others, all future burns work fine.
      log file:

      9095-839M-C0PW-C0AU-5987-PCA7-****-****
      9066-839K-TWH0-KWUH-WL55-LWEC-****-****
      901E-038E-T2AL-H2LU-XU50-0UL4-****-****
      9004-0379-T66W-UC20-CHUC-L7K7-****-****

      Windows 8 6.2
      AMD64
      Wow64Process
      Nero Version: 19.1.1.10
      Internal Version: 19,1,1,10

      Recorder : FW version: 1.00 - HA 1 TA 1 - 19.1.1.10
      Device bus : <> HA 1
      Host system bus :
      Drive buffer : 4096kB
      Bus Type : via Inquiry data
      CD/DVD-ROM : FW version: SB00 - HA 1 TA 0 - 19.1.1.10
      Device bus : <> HA 1
      Host system bus :

      === Scsi-Device-Map ===
      : ST31000524AS storahci Port 0 ID 0 DMA: Off
      : OCZ-VERTEX4 storahci Port 0 ID 0 DMA: Off
      : TSSTcorpCDDVDW SH-222BB SB00 storahci Port 0 ID 0 DMA: Off
      : OCZ VERTEX PLUS storahci Port 0 ID 0 DMA: Off
      : HL-DT-STBD-RE BH12LS38 1.00 storahci Port 0 ID 0 DMA: Off

      === CDRom-Device-Map ===
      TSSTcorp CDDVDW SH-222BB D: CdRom0
      HL-DT-ST BD-RE BH12LS38 E: CdRom1
      =======================

      AutoRun : 1
      Excluded drive IDs:
      WriteBufferSize: 83886080 (0) Byte
      BUFE : 0
      Physical memory : 2047MB (2097151kB)
      Free physical memory: 2047MB (2097151kB)
      Memory in use : 15 %
      Uncached PFiles: 0x0
      Global Bus Type: default (0)
      Check supported media : Disabled (0)

      3.8.2018
      UDF compilation
      18:19:54 #1 Text 0 File SCSIPTICommands.cpp, Line 617
      LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

      18:19:54 #2 Text 0 File Isodoc.cpp, Line 7701
      UDF document burn settings
      ------------------------------------------
      Determine maximum speed : FALSE
      Simulate : FALSE
      Write : TRUE
      Finalize CD : FALSE
      Multisession : TRUE
      Multisession type: : Start multisession
      Burning mode : DAO
      Mode : 1
      UDF Mode : pure
      UDF Options : automatic
      UDF Revision : 1.02
      UDF Partition Type : physical

      18:19:55 #3 PHASE 214 File dlgbrnst.cpp, Line 2108
      Generation of disc structures started

      18:19:55 #4 Text 0 File compose.cpp, Line 970
      GenUDF2: 1 transfer items prepared.

      18:19:55 #5 Text 0 File compose.cpp, Line 970
      GenUDF2: 1 transfer items prepared.

      18:19:56 #6 PHASE 215 File dlgbrnst.cpp, Line 2108
      Generation of disc structures completed

      18:19:56 #7 Text 0 File Burncd.cpp, Line 4086
      Turn on Disc-At-Once, using Blu-ray Disc media

      18:19:56 #8 Text 0 File DlgWaitCD.cpp, Line 335
      [E: BD-RE BH12LS38 ] Total disc capacity: 24438784 47732MB
      User data to be written: 23706560 46301MB
      Free space on disc: 24438784 47732MB

      18:19:56 #9 Text 0 File DlgWaitCD.cpp, Line 347
      [E: BD-RE BH12LS38 ] Write in overburning mode: NO (enabled: CD)

      18:19:56 #10 Text 0 File DlgWaitCD.cpp, Line 3127
      Recorder: HL-DT-ST BD-RE BH12LS38, Media type: BD-R (seq)

      18:19:56 #11 Text 0 File DlgWaitCD.cpp, Line 537
      [E: BD-RE BH12LS38 ] >>> Protocol of DlgWaitCD activities: <<<
      =========================================

      18:19:58 #12 Text 0 File ThreadedTransferInterface.cpp, Line 879
      Setup items (after recorder preparation)
      0: TRM_DATA_MODE1 ()
      2 indices, index0 (150) not provided
      original disc pos #0 + 23706560 (23706560) = #23706560/5268:7.35
      relocatable, disc pos for caching/writing not required/ required
      -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 23706560 blocks [E: HL-DT-ST BD-RE BH12LS38]
      --------------------------------------------------------------

      18:19:58 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1095
      Prepare [E: HL-DT-ST BD-RE BH12LS38] for write in CUE-sheet-DAO
      DAO infos:
      ==========
      MCN: ""
      TOCType: 0x00; Session Closed, disc not fixated
      Tracks 1 to 1: Idx 0 Idx 1 Next Trk
      1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 48551034880, ISRC ""
      DAO layout:
      ===========
      ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
      0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
      0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
      0 | 1 | 1 | 0x41 | 23706560 | 0 | 0x00
      23706560 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
      MediaType: BD-R DL

      18:19:58 #14 Text 0 File SCSIPTICommands.cpp, Line 404
      SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

      18:19:58 #15 Text 0 File Burncd.cpp, Line 4984
      Caching options: cache CDRom or Network-Yes, small files-No (
      Disc Information Format: 01 h
      Number of DI Units/Aux Frames in each DI block: 10
      Number of (recording) layer to which this DI Unit applies: 0
      DI unit Sequence Number in DI Block: 0
      Continuation flag: Next DI Unit is the start of a new set of parameters (0)
      Number of DI bytes in use in this DI unit: 98
      --- Body ---
      Disc Type Identifier:
      Disc Size/Class/Version: 1
      DI Unit Format dependent contents:
      BD Structure: 34 (22 h):
      2 recording layer (DL), BD-R
      Hybrid Disc identifier/Channel bit length: 1 (1 h):
      no DVD layer present, no CD layer present
      channel bit length of 74,5 nm (25.0 GB max. per layer)
      Push-Pull polarity flag bits: 00 h
      Recorded mark polarity flag bits: 00 h
      BCA descriptor: BCA-code present (1)
      Maximum transfer rate needed by the application: 0 Mbit/s
      Data zone allocation:
      First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
      Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
      Recording velocities:
      Nominal Recording Velocity: 4.92 m/s (1EC h)
      Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
      Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
      ...
      22 01 00 00 01 00 00 00 - 00 00 00 00 00 02 00 00
      00 19 4E 7E 01 EC 64 64 - 46 46 46 46 3C 3C 3C 3C
      00 00 00 00 95 59 76 02 - 02 38 1C 64 90 F0 F0 F0
      F0 F0 F0 F0 F0 00 00 00 - 00 48 00 48 00 48 00 48
      00 48 00 48 00 48 00 48 - 00 48 00 48 00 48 00 48
      00 70 70 BC D0 D0 00 00
      --- Trailer ---
      Disc Manufacturer ID: 43 4D 43 4D 41 47 h
      Media Type ID: 44 49 36
      Time Stamp [m:y]: 0 : 0000 (00 00 h)
      Product Revision Number: 0

      18:19:59 #22 Text 0 File BD.cpp, Line 416
      Allocated spare area size on disc ca0000h
      BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
      spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

      18:19:59 #23 Text 0 File ThreadedTransfer.cpp, Line 275
      Pipe memory size 83836800

      18:19:59 #24 Text 0 File CUDFTransferItem2.cpp, Line 713

      GenUDF2 FS Layout:
      =-=-=-=-=-=-=-=-=-=-
      Sectors to be written: 23706560
      Session Start: Sector 0
      Volume Structure: Sector [0, 256] (257 Sectors)
      Meta Data: Sector [257, 10689] (10433 Sectors)
      Data: Sector [10690, 23706226] (23695537 Sectors)
      After Data: Sector [23706227, 23706239] (13 Sectors)
      Trailer Track: Sector [23706240, 23706559] (320 Sectors)

      GenUDF2 Parameters:
      =-=-=-=-=-=-=-=-=-=-
      PrepTime: 08-03-2018 18:19:55
      UDF Revision: 1.02
      UDF Partition Type: Physical
      UDF Special Mode: None
      Bytes per Sector: 2048
      Session Start: 0
      Physical Partition Start: -1
      Total Capacity: 24438784
      Multi Session Mode: Begin
      Disc Type: BD-R DL
      OS Class: 0
      Volume ID: Blu-CUB_2016a
      Allow Unicode Labels: 0
      Duplicate Meta Data: 1
      MS Info File: 106A7C10
      VMS Rollback File: 00000000
      Create ISO bridge: 0
      ECC Block Length: 32
      Sparing Packet Length: 32
      Allocation Unit Size: 32
      Alignment Unit Size: 32
      Make Writable: 0
      Access Type: Read-only

      18:53:53 #25 Text 0 File WriterStatus.cpp, Line 245
      start writing Lead-Out at LBA 23706560 (169BBC0h), length 0 blocks

      18:53:56 #26 Text 0 File DVDPlusDualLayer.cpp, Line 1464
      SetDriveCaps: Set LAST LBA of layer 1 to 0

      18:53:56 #27 PHASE 37 File dlgbrnst.cpp, Line 2108
      Burn process completed successfully at 6x (26,970 KB/s)

      18:53:59 #28 Text 0 File SCSIPTICommands.cpp, Line 454
      SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

      18:53:59 #29 Text 0 File Cdrdrv.cpp, Line 12297
      DriveLocker: UnLockVolume completed

      18:53:59 #30 Text 0 File SCSIPTICommands.cpp, Line 617
      UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

      18:54:06 #31 SPTI -1079 File SCSIPassThrough.cpp, Line 225
      CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1079)
      CDB Data: 0x1B 00 00 00 02 00
      Sense Key: 0x04 (KEY_HARDWARE_ERROR)
      Sense Code: 0x53
      Sense Qual: 0x00
      Sense Area: 0x70 00 04 00 00 00 00 0A 02 00 03 D4 53
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. happy, confident, thankful, excited kidding, amused, unsure, silly indifferent, undecided, unconcerned sad, anxious, confused, frustrated