Help get this topic noticed by sharing it on Twitter, Facebook, or email.
I’m unhappy and concerned

Nero 2015 could not perform end of disc-at-once

Nero 2015 Burning ROM fails to write, saying it can't perform end of Disc-at-once - regardless of disk write speed or anything else I can figure out.

I have the log, but it doesn't show the failure in particular. The image shows "canceled by user" because I canceled after being told that this disc would write again.


Here's the log, with the registration number replaced with more stars:

****-****-****-****-****-*-****-****

Windows 8 6.2
AMD64
Wow64Process
Nero Version: 16.0.23.0
Internal Version: 16,0,23,0

Recorder : FW version: TF01 - HA 1 TA 0 - 16.0.23.0
Device bus : <> HA 1
Host system bus :
Drive buffer : 512kB
Bus Type : via Inquiry data
CD/DVD-ROM : FW version: TF01 - HA 1 TA 0 - 16.0.23.0
Device bus : <> HA 1
Host system bus :

=== Scsi-Device-Map ===
: TSSTcorpCDDVDW SU-208DB TF01 iaStorA Port 0 ID 0 DMA: Off
: ST975042ST9750420AS 0001 iaStorA Port 0 ID 0 DMA: Off
: TOSHIBA MQ01ABD075 AX0A iaStorA Port 0 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CDDVDW SU-208DB D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.3.2015
UDF compilation
12:07:50 #1 Text 0 File SCSIPTICommands.cpp, Line 617
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:07:50 #2 Text 0 File Isodoc.cpp, Line 7687
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

12:07:50 #3 PHASE 214 File dlgbrnst.cpp, Line 2095
Generation of disc structures started

12:07:50 #4 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f4700: Len x20

12:07:50 #5 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f4fc0: Len x20

12:07:50 #6 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x25 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x11027e40: Len x8

12:07:50 #7 Text 0 File compose.cpp, Line 970
GenUDF2: 1 transfer items prepared.

12:07:50 #8 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f5500: Len x20

12:07:50 #9 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f5500: Len x20

12:07:50 #10 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f4bc0: Len x20

12:07:50 #11 PHASE 215 File dlgbrnst.cpp, Line 2095
Generation of disc structures completed

12:07:50 #12 Text 0 File Burncd.cpp, Line 4086
Turn on Disc-At-Once, using CD-R/RW, DVD R/RW, DVD DL, DVD-RAM media

12:07:50 #13 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f4700: Len x20

12:07:50 #14 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f4700: Len x20

12:07:50 #15 SPTI -1196 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x02
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
Buffer x084f4bc0: Len x20

12:07:52 #16 PHASE 40 File dlgbrnst.cpp, Line 2095
Canceled by user

12:07:52 #17 Text 0 File DlgWaitCD.cpp, Line 347
[D: CDDVDW SU-208DB ] Write in overburning mode: NO (enabled: CD)

12:07:52 #18 Text 0 File DlgWaitCD.cpp, Line 3127
Recorder: TSSTcorp CDDVDW SU-208DB
Medium not present

12:07:52 #19 Text 0 File DlgWaitCD.cpp, Line 537
[D: CDDVDW SU-208DB ] >>> Protocol of DlgWaitCD activities: <<<
=========================================
Please insert an empty disc to write to...
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW, DVD R/RW, DVD DL, DVD-RAM.)
Data to be written: 8411 MB
Space available on the disc: 8411 MB

12:07:52 #20 Text 0 File SCSIPTICommands.cpp, Line 617
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1 person has
this question
+1
Reply