Help get this topic noticed by sharing it on Twitter, Facebook, or email.

What does "invalid block address" mean?

During Nero 2015 Burning ROM - disk copy I received the message "invalid Block Address:. This was on my internal CD/DVD burner on my laptop which I just re-installed. I had Windows detect any new devises, which it indicated it did. The copy process seemed to proceed fine until about 31% copied then a failed message. I have saved the log file. Any ideas?
2 people have
this question
+1
Reply
  • Here is the log file:
    9053-82C7-2LHL-H6LP-AP6C-6032-****-****
    9004-0252-5646-3LP7-8M9P-KA61-****-****
    900A-0298-K2AZ-17MC-XKKP-MH8C-****-****
    XX06-00A3-U5MZ-AKE4-CH49-AZ3A-****-****

    Windows 7 6.1
    AMD64
    Wow64Process
    Nero Version: 16.0.23.0
    Internal Version: 16,0,23,0

    Recorder : FW version: A101 - HA 1 TA 0 - 16.0.23.0
    Device bus : <> HA 1
    Host system bus :
    Drive buffer : 1024kB
    Bus Type : via Inquiry data
    CD/DVD-ROM : FW version: 1.00 - HA 1 TA 2 - 16.0.23.0
    Device bus : <> HA 1
    Host system bus :

    === Scsi-Device-Map ===
    : ATA ST9640423AS DEM1 iaStorA Port 0 ID 0 DMA: Off
    : HL-DT-STDVD+-RW GT50N A101 iaStorA Port 0 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD+-RW GT50N D: CdRom0
    HL-DT-ST DVDRAM GE20LU11 J: CdRom1
    HL-DT-ST BD-RE BE14NU40 E: CdRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 4095MB (4194303kB)
    Free physical memory: 4095MB (4194303kB)
    Memory in use : 28 %
    Uncached PFiles: 0x0
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    30.6.2015
    ===== Disc-Copy over image - 1st step : Copy to image ...

    10:46:23 #1 SPTI -1033 File SCSIPassThrough.cpp, Line 225
    CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1033)
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    Sense Area: 0x71 00 02 00 00 00 00 0A 00 00 00 00 04 01

    10:46:25 #2 SPTI -1033 File SCSIPassThrough.cpp, Line 225
    CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1033)
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    Sense Area: 0x71 00 02 00 00 00 00 0A 00 00 00 00 04 01

    10:47:14 #3 Text 0 File Image.cpp, Line 912
    Image file:

    10:47:16 #4 Text 0 File SCSIPTICommands.cpp, Line 617
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    10:47:16 #5 Text 0 File SCSIPTICommands.cpp, Line 404
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    10:47:16 #6 PHASE 214 File dlgbrnst.cpp, Line 2095
    Generation of disc structures started

    10:47:16 #7 Text 0 File DVDCopy.cpp, Line 323
    DVD Track-Information from source disc:
    Media Type: DVD+R
    S01 T01 Con 0x14 Start 0 Len 1493456 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    10:47:16 #8 Text 0 File DVDCopy.cpp, Line 427
    Max -1 tracks of 1 allowed to copy
    1: 0 - 1493456 = 1493456, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    10:47:16 #9 PHASE 215 File dlgbrnst.cpp, Line 2095
    Generation of disc structures completed

    10:47:16 #10 Text 0 File Burncd.cpp, Line 4086
    Turn on Disc-At-Once, using DVD media

    10:47:16 #11 Text 0 File DlgWaitCD.cpp, Line 335
    [ Image Recorder ] Last possible write address on media: 4718591
    Last address to be written: 1493455

    10:47:16 #12 Text 0 File DlgWaitCD.cpp, Line 347
    [ Image Recorder ] Write in overburning mode: NO (enabled: CD)

    10:47:16 #13 Text 0 File DlgWaitCD.cpp, Line 537
    [ Image Recorder ] >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:47:16 #14 Text 0 File ThreadedTransferInterface.cpp, Line 879
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 1493456 (1493456) = #1493456/331:52.56
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1493456 blocks [Image Recorder]
    --------------------------------------------------------------

    10:47:16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1095
    Prepare [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3058597888, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1493456 | 1493456 | 0x00
    1493456 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
    MediaTypes: 0004005e

    10:47:16 #16 Text 0 File Burncd.cpp, Line 4984
    Caching options: cache CDRom or Network-No, small files-No ( start writing Lead-Out at LBA 1493456 (16C9D0h), length 0 blocks

    10:54:10 #21 PHASE 121 File dlgbrnst.cpp, Line 2095
    Creating Image completed successfully

    10:54:10 #22 Text 0 File SCSIPTICommands.cpp, Line 454
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    10:54:15 #23 Text 0 File SCSIPTICommands.cpp, Line 617
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    10:54:15 #24 Text 0 File Cdrdrv.cpp, Line 12297
    DriveLocker: UnLockVolume completed

    ===== Disc-Copy over image - 2nd step : Burn the image ...

    10:54:16 #1 Text 0 File SCSIPTICommands.cpp, Line 617
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    10:54:16 #2 PHASE 214 File dlgbrnst.cpp, Line 2095
    Generation of disc structures started

    10:54:16 #3 IMAGEGEN -10 File ImageGen.cpp, Line 400
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3058597888
    CUES:
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name:

    10:54:16 #4 PHASE 215 File dlgbrnst.cpp, Line 2095
    Generation of disc structures completed

    10:54:16 #5 Text 0 File Burncd.cpp, Line 4086
    Turn on Disc-At-Once, using DVD media

    10:54:16 #6 Text 0 File DlgWaitCD.cpp, Line 335
    [D: DVD+-RW GT50N ] Last possible write address on media: 2295103
    Last address to be written: 1493455

    10:54:16 #7 Text 0 File DlgWaitCD.cpp, Line 347
    [D: DVD+-RW GT50N ] Write in overburning mode: NO (enabled: CD)

    10:54:16 #8 Text 0 File DlgWaitCD.cpp, Line 3127
    Recorder: HL-DT-ST DVD+-RW GT50N, Media type: DVD+R
    Disc Manufacturer ID: , Media Type ID: , Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    10:54:16 #9 Text 0 File DlgWaitCD.cpp, Line 537
    [D: DVD+-RW GT50N ] >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:54:16 #10 Text 0 File ThreadedTransferInterface.cpp, Line 879
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1493456 (1493456) = #1493456/331:52.56
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1493456 blocks [D: HL-DT-ST DVD+-RW GT50N]
    --------------------------------------------------------------

    10:54:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1095
    Prepare [D: HL-DT-ST DVD+-RW GT50N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3058597888, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1493456 | 0 | 0x00
    1493456 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
    MediaType: DVD+R

    10:54:16 #12 Text 0 File SCSIPTICommands.cpp, Line 404
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    10:54:16 #13 Text 0 File Burncd.cpp, Line 4984
    Caching options: cache CDRom or Network-No, small files-No ( (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: R05
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..783]:
    00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
    23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
    01 00 38 38 02 28 60 1A - 05 2E 23 10 04 1E 1D 01 ..88.(`...#.....
    00 00 02 28 60 1A 05 2E - 23 10 04 1E 1D 01 00 00 ...(`...#.......
    02 00 54 70 02 2E 62 3C - 24 14 0C 0C 01 20 00 00 ..Tp..b
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited sad, anxious, confused, frustrated

  • Hi-

    I need the rest of the log file. Please post it.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited sad, anxious, confused, frustrated

  • This reply was removed on 2015-07-02.
    see the change log
  • This reply was removed on 2015-07-02.
    see the change log
  • for some reason the log is being cut even though I have pasted the entire log.

    10:54:16 #12 Text 0 File SCSIPTICommands.cpp, Line 404
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    10:54:16 #13 Text 0 File Burncd.cpp, Line 4984
    Caching options: cache CDRom or Network-No, small files-No ( (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: R05
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..783]:
    00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
    23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
    01 00 38 38 02 28 60 1A - 05 2E 23 10 04 1E 1D 01 ..88.(`...#.....
    00 00 02 28 60 1A 05 2E - 23 10 04 1E 1D 01 00 00 ...(`...#.......
    02 00 54 70 02 2E 62 3C - 24 14 0C 0C 01 20 00 00 ..Tp..b
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited sad, anxious, confused, frustrated

  • Typically, the logs are too long to fit in one post. Thus you must copy and paste to more than one post. I hope that's not all of the remainder of the log.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited sad, anxious, confused, frustrated

  • Wither,
    3 times I have pasted all or part of the log. Today I pasted the complete log, it seemed to fit and now it's not here. I have ascertained that the problem is in the Nero software as other editing programs allow the laptop cd/dvd burner to compete my test 3.5GB burn. I also noted while doing a search that all problems of a similar nature were with users of Nero software. It's obviously not a new issue with Nero. I deleted and reinstalled Nero 2015 today and the problem still is there. If I need to burn a Nero project on the laptop burner, I will use another program. I have also set my virus projection to allow nero.exe files. These were all recommendations from prior suggestions from Nero forums going back to 2010 and from version 7.0 up through Nero 14.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited sad, anxious, confused, frustrated

  • Just one more attempt to send the log file:
    9053-82C7-2LHL-H6LP-AP6C-6032-****-****
    9004-0252-5646-3LP7-8M9P-KA61-****-****
    900A-0298-K2AZ-17MC-XKKP-MH8C-****-****
    XX06-00A3-U5MZ-AKE4-CH49-AZ3A-****-****

    Windows 7 6.1
    AMD64
    Wow64Process
    Nero Version: 16.0.23.0
    Internal Version: 16,0,23,0

    Recorder : FW version: A101 - HA 1 TA 0 - 16.0.23.0
    Device bus : <> HA 1
    Host system bus :
    Drive buffer : 1024kB
    Bus Type : via Inquiry data
    CD/DVD-ROM : FW version: 1.00 - HA 1 TA 1 - 16.0.23.0
    Device bus : <> HA 1
    Host system bus :

    === Scsi-Device-Map ===
    : ATA ST9640423AS DEM1 iaStorA Port 0 ID 0 DMA: Off
    : HL-DT-STDVD+-RW GT50N A101 iaStorA Port 0 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD+-RW GT50N D: CdRom0
    HL-DT-ST BD-RE BE14NU40 E: CdRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 4095MB (4194303kB)
    Free physical memory: 4095MB (4194303kB)
    Memory in use : 27 %
    Uncached PFiles: 0x0
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.7.2015
    ===== Disc-Copy over image - 1st step : Copy to image ...

    11:32:05 #1 Text 0 File Image.cpp, Line 912
    Image file:

    11:32:06 #2 Text 0 File SCSIPTICommands.cpp, Line 617
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    11:32:06 #3 Text 0 File SCSIPTICommands.cpp, Line 404
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    11:32:06 #4 PHASE 214 File dlgbrnst.cpp, Line 2095
    Generation of disc structures started

    11:32:06 #5 Text 0 File DVDCopy.cpp, Line 323
    DVD Track-Information from source disc:
    Media Type: DVD+R
    S01 T01 Con 0x14 Start 0 Len 1493456 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    11:32:06 #6 Text 0 File DVDCopy.cpp, Line 427
    Max -1 tracks of 1 allowed to copy
    1: 0 - 1493456 = 1493456, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    11:32:06 #7 PHASE 215 File dlgbrnst.cpp, Line 2095
    Generation of disc structures completed

    11:32:06 #8 Text 0 File Burncd.cpp, Line 4086
    Turn on Disc-At-Once, using DVD media

    11:32:07 #9 Text 0 File DlgWaitCD.cpp, Line 335
    [ Image Recorder ] Last possible write address on media: 4718591
    Last address to be written: 1493455

    11:32:07 #10 Text 0 File DlgWaitCD.cpp, Line 347
    [ Image Recorder ] Write in overburning mode: NO (enabled: CD)

    11:32:07 #11 Text 0 File DlgWaitCD.cpp, Line 537
    [ Image Recorder ] >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:32:07 #12 Text 0 File ThreadedTransferInterface.cpp, Line 879
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 1493456 (1493456) = #1493456/331:52.56
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1493456 blocks [Image Recorder]
    --------------------------------------------------------------

    11:32:07 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1095
    Prepare [Image Recorder] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3058597888, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1493456 | 1493456 | 0x00
    1493456 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
    MediaTypes: 0004005e

    11:32:07 #14 Text 0 File Burncd.cpp, Line 4984
    Caching options: cache CDRom or Network-No, small files-No ( start writing Lead-Out at LBA 1493456 (16C9D0h), length 0 blocks

    11:37:24 #19 PHASE 121 File dlgbrnst.cpp, Line 2095
    Creating Image completed successfully

    11:37:24 #20 Text 0 File SCSIPTICommands.cpp, Line 454
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    11:37:29 #21 Text 0 File SCSIPTICommands.cpp, Line 617
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    11:37:29 #22 Text 0 File Cdrdrv.cpp, Line 12297
    DriveLocker: UnLockVolume completed

    ===== Disc-Copy over image - 2nd step : Burn the image ...

    11:37:29 #1 Text 0 File SCSIPTICommands.cpp, Line 617
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    11:37:29 #2 PHASE 214 File dlgbrnst.cpp, Line 2095
    Generation of disc structures started

    11:37:29 #3 IMAGEGEN -10 File ImageGen.cpp, Line 400
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3058597888
    CUES:
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name:

    11:37:29 #4 PHASE 215 File dlgbrnst.cpp, Line 2095
    Generation of disc structures completed

    11:37:29 #5 Text 0 File Burncd.cpp, Line 4086
    Turn on Disc-At-Once, using DVD media

    11:37:30 #6 Text 0 File DlgWaitCD.cpp, Line 335
    [D: DVD+-RW GT50N ] Last possible write address on media: 2295103
    Last address to be written: 1493455

    11:37:30 #7 Text 0 File DlgWaitCD.cpp, Line 347
    [D: DVD+-RW GT50N ] Write in overburning mode: NO (enabled: CD)

    11:37:30 #8 Text 0 File DlgWaitCD.cpp, Line 3127
    Recorder: HL-DT-ST DVD+-RW GT50N, Media type: DVD+R
    Disc Manufacturer ID: , Media Type ID: , Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    11:37:30 #9 Text 0 File DlgWaitCD.cpp, Line 537
    [D: DVD+-RW GT50N ] >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:37:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 879
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1493456 (1493456) = #1493456/331:52.56
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1493456 blocks [D: HL-DT-ST DVD+-RW GT50N]
    --------------------------------------------------------------

    11:37:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1095
    Prepare [D: HL-DT-ST DVD+-RW GT50N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3058597888, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1493456 | 0 | 0x00
    1493456 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
    MediaType: DVD+R
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited sad, anxious, confused, frustrated

  • Don't kid yourself. You will find many problems with burning in the forums for cyberlink, roxio, imagburn, etc. Nero has been around longer than most of them. Most problems with burning are related to the media, the drive, or the write speed. It doesn't matter what the software is that you start with. Once it gets into the burning mode, the software itself has no control. it's a Windows and drive firmware thing.

    You can't normally post the contents of an entire log into one post. For instance, where the log in your last post says MediaType. DVD+R, you will have to get the contents that follow that and copy it to a new post. If it's still too long, you need to repeat the process. So far, there are no significant errors in the log.
  • (some HTML allowed)
    How does this make you feel?
    Add Image
    I'm

    e.g. indifferent, undecided, unconcerned kidding, amused, unsure, silly happy, confident, thankful, excited sad, anxious, confused, frustrated